Licensed electricians for homes, shops and solar

Across Melbourne’s inner north and east. Switchboards, smoke alarms, EV chargers, fit-outs and batteries: tested, certified and tidied up after.

Phone hours: Mon–Fri 7am–5pm, Sat 8am–12pm

Open matte-charcoal electrical switchboard with high-vis yellow DIN-rail circuit breakers, copper and Australian-standard wiring, and glowing circuit traces feeding a solar home.Open matte-charcoal electrical switchboard with high-vis yellow DIN-rail circuit breakers, copper and Australian-standard wiring, and glowing circuit traces feeding a solar home.

Flip a breaker to see the job

Six of the jobs we do most, each on its own circuit. Every one ends with testing and a compliance certificate you can file with your house papers.

  • residential circuit, 63 A

    Switchboard upgrade

    Swap an old ceramic-fuse board for a modern board with RCD protection on every circuit.

    • RCBOs on every circuit
    • Labelled circuit schedule
    • Certificate of Electrical Safety
  • residential circuit, 10 A

    Smoke alarms, 240 V interconnected

    Mains-powered photoelectric alarms with battery backup, linked so one sounds them all.

    • Photoelectric alarms with 10-year backup
    • Interconnected throughout
    • Old alarms taken away
  • residential circuit, 32 A

    EV charger install

    A 7 kW wall charger on its own circuit, sized to your switchboard and supply.

    • Load check on your supply
    • Dedicated circuit and RCD
    • Solar-aware charger setup
  • residential circuit, 16 A

    Electrical safety inspection

    A full room-by-room check with RCD trip-time testing and a written report you can keep.

    • RCD trip-time testing
    • Switchboard and earthing check
    • Written report with photos
  • commercial circuit, 40 A

    Shop and office fit-outs

    Lighting, power, three-phase equipment circuits and signage for new and refreshed spaces.

    • Drawings and load calculations
    • Out-of-hours work on request
    • Compliance certificate on handover
  • solar circuit, 32 A

    Solar PV, 6.6 kW system

    A 6.6 kW array with a 5 kW inverter, designed around your roof, shading and power bills.

    • Shading and roof assessment
    • Tier 1 panels and inverter
    • Grid connection paperwork

Licensed, registered and insured

Ask for these numbers on any quote. We print them on ours, and the full details are on the safety check page.

  • Energy Safe Victoria

    Electrical contractor

    REC 23417 (sample)

    Valid to Jun 2027

  • Energy Safe Victoria

    A-grade licence

    A 58820 (sample)

    Valid to Feb 2028

  • Solar Accreditation Australia

    Solar accredited

    S 9041273 (sample)

    Valid to Sep 2027

  • Sample insurer

    $20M insured

    PL-204-118 (sample)

    Valid to Mar 2027

Off the job board this month

Three recent dockets, copied straight from the van. Different suburbs, different jobs, same sign-off.

  1. Docket 2291Switchboard upgrade

    Northcote

    1950s fuse board to RCBO board

    Rewired fuses replaced with a 12-way board, RCBO on every circuit and the meter panel re-sheeted.

    1 day on site

  2. Docket 2304Shop and office fit-outs

    Collingwood

    Café fit-out: pendants, three-phase coffee machine circuit, exit lights

    New tenancy board, a dedicated three-phase circuit for the espresso machine and exit signs signed off.

    6 days on site

  3. Docket 2317Solar PV, 6.6 kW system

    Camberwell

    6.6 kW array on a slate-look tile roof

    Eighteen panels split across two roof faces to dodge a chimney shadow, with a 5 kW inverter in the garage.

    2 days on site

Checks you can do in ten minutes

Look-don’t-touch checks for your board, power points, smoke alarms and solar. Tick them off on screen or print the sheet.

Do the 10-minute check
  • Press each RCD’s Test button every six months; it should trip.
  • Feel for power points or plugs that are warm or discoloured.
  • Press each smoke alarm’s test button; all of them should sound.
  • Look for cracked, melted or water-stained rooftop or wall DC isolators.

Wired out from Abbotsford

Our vans leave the workshop near Victoria Park every morning. If your suburb is on the board, we’re usually there within the week.

  • 1Northcote
  • 2Brunswick
  • 3Carlton North
  • 4Fitzroy
  • 5Collingwood
  • 6Abbotsford
  • 7Richmond
  • 8Kew
  • 9Hawthorn
  • 10Camberwell
  • 11Box Hill
  • 12Doncaster

What a visit costs

Prices include GST. Fixed-price jobs cost what the services list says; everything else gets a written quote before we start.

Call-out
$99Covers the first 30 minutes on site
Hourly after that
$118/hrBilled in 15-minute increments
Phone hours, Mon–Fri
7am–5pmSat 8am–12pm

Phone hours: Mon–Fri 7am–5pm, Sat 8am–12pm

Got a job? Tell us what’s tripping.

Send a few lines about the job and your suburb. We’ll reply within one working day.